Lancer Sportback L4-2.4L (4B12) (2010)
combination meter light does not illuminate normally or the multi information display is not displayed normally.) See: Instrument Panel, Gauges
and Warning Indicators/Instrument Cluster / Carrier/Testing and Inspection/Symptom Related Diagnostic Procedures/Symptom
Procedures/Inspection Procedure 5 Then go to Step 6.
STEP 5. Check the symptoms.
Q: When the "ON/OFF" switch is turned ON, is the "CRUISE" indicator light illuminated?
YES : It can be assumed that this malfunction is intermittent.
NO : Replace the ECM. When the ECM is replaced, register the encrypted code (Refer to Diagnosis - ID Code Registration Judgment Table.)
See: Body and Frame/Body Control Systems/Testing and Inspection/Scan Tool Testing and Procedures/ID Codes Registration Judgment Table
Then go to Step 6.
STEP 6. Check the symptoms.
Q: When the "ON/OFF" switch is turned ON, is the "CRUISE" indicator light illuminated?
YES : The procedure is complete.
NO : Return to Step 1.
Component Tests and General Diagnostics
CRUISE CONTROL SYSTEM COMPONENT CHECK
CRUISE CONTROL SWITCH CHECK
1. Remove the cruise control switch.