Lancer Sportback L4-2.4L (4B12) (2010)
/Page-572127.png)
2. Measure the resistance between joint connector (CAN1) terminal 1 and body ground.
OK: 1 kohm or more
3. Measure the resistance between joint connector (CAN1) terminal 12 and body ground.
OK: 1 kohm or more
Q: Do all the resistances measure 1 kohm or more?
YES (vehicles without MMCS) : Go to Step 9.
YES (vehicles with MMCS) : Go to Step 10.
NO : Go to Step 30.
STEP 9. Check the wiring harness between joint connector (CAN1) C-06 and radio and CD player connector C-104 for a short to ground.
Measure the resistance at joint connector (CAN1) C-06.
1. Disconnect joint connector (CAN1), and measure the resistance at the wiring harness side of joint connector (CAN1).
2. Measure the resistance between joint connector (CAN1) terminal 7 and body ground.
OK: 1 kohm or more
