Lancer Sportback L4-2.4L (4B12) (2010)
/Page-572128.png)
3. Measure the resistance between joint connector (CAN1) terminal 20 and body ground.
OK: 1 kohm or more
Q: Do all the resistances measure 1 kohm or more?
YES [vehicles without satellite radio] : Go to Step 12.
YES [vehicles with satellite radio] : Go to Step 11.
NO : Go to Step 31.
STEP 10. Check the wiring harness between joint connector (CAN1) C-06 and CAN box unit connector C-108 for a short to ground. Measure
the resistance at joint connector (CAN1) C-06.
1. Disconnect joint connector (CAN1), and measure the resistance at the wiring harness side of joint connector (CAN1).
2. Measure the resistance between joint connector (CAN1) terminal 7 and body ground.
OK: 1 kohm or more
3. Measure the resistance between joint connector (CAN1) terminal 20 and body ground.
OK: 1 kohm or more
Q: Do all the resistances measure 1 kohm or more?
YES [vehicles without satellite radio] : Go to Step 12.
