Montero V6-3.8L SOHC (2005)
Sunroof Motor Assembly Power Supply Circuit Part 2
CIRCUIT OPERATION
-
The sunroof motor assembly is energized through fusible link (1) and (4).
-
When the ignition switch (IG2) signal is on, the sunroof motor assembly is ready to operate.
TROUBLESHOOTING HINTS
-
The sunroof switch may be defective
-
The sunroof motor assembly may be defective
-
The wiring harness or connectors may have loose, corroded or damaged terminals, or terminals pushed back in the connector
DIAGNOSIS
Required Special Tool:
-
MB991223: Harness Set
STEP 1. Check the sunroof motor assembly connector F-02 for loose, corroded or damaged terminals, or terminals pushed back in the
connector.
