Montero V6-3.8L SOHC (2005)
STEP 12. Check headlight (RH) connector A-32 and front-ECU connector A-07X for loose, corroded or damaged terminals, or terminals
pushed back in the connector.
Q: Are headlight (RH) connector A-32 and front-ECU connector A-07X in good condition?
YES: Go to Step 13.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Verify that the headlights illuminate normally.
STEP 13. Check the wiring harness between headlight (RH) connector A-32 (terminal 1) and front-ECU connector A-07X (terminal 6).
Q: Is the wiring harness between headlight (RH) connector A-32 (terminal 1) and front-ECU connector A-07X (terminal 6) in good condition?
YES: No action is necessary and testing is complete.