Montero V6-3.8L SOHC (2005)
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. Verify that the headlights illuminate normally.
STEP 14. Check headlight (LH) bulb.
1. Remove the headlight (LH) bulb.
2. Verify that the headlight (LH) bulb is not damaged or burned out.
Q: Is headlight (LH) bulb normal?
YES: Go to Step 15.
NO: Replace the headlight (LH) bulb. Verify that the headlights illuminate normally.
STEP 15. Check headlight (LH) connector A-20 and front-ECU connector A-07X for loose, corroded or damaged terminals, or terminals
pushed back in the connector.
Q: Are headlight (LH) connector A-20 and front-ECU connector A-07X in good condition?
YES: Go to Step 16.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Verify that the headlights illuminate normally.
