Montero V6-3.8L SOHC (2005)
STEP 3. Check fog light relay connector A-13X for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is fog light relay connector A-13X in good condition?
YES: Go to Step 4.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Verify that the fog lights illuminate normally.
STEP 4. Check the fog light relay.
Q: Is the fog light relay in good condition?
YES: Go to Step 5.
NO: Replace the fog light relay. Verify that the fog lights illuminate normally.
STEP 5. Check the battery power supply circuit to the fog light relay. Test at fog light relay connector A-13X.
