mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2552 > < Initial Inspection and Diagnostic Overview|Page 2550
Page 93
background image

STEP 24. Check ETACS-ECU connector D-222 for loose, corroded or damaged terminals, or terminals pushed back in the connector.

Q: Is ETACS-ECU connector D-222 in good condition?

YES: Go to Step 25.

NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Verify that all the doors (including the back door) can be
locked and unlocked normally.

Initial Inspection and Diagnostic Overview|Page 2552 > < Initial Inspection and Diagnostic Overview|Page 2550