Montero V6-3.8L SOHC (2005)
STEP 11. Check the wiring harness between combination meter connector D-04 (terminal 32) and ETACS-ECU connector D-224 (terminal 39).
Q: Is the wiring harness between combination meter connector D-04 (terminal 32) and ETACS-ECU connector D-224 (terminal 39) in good condition?
YES: No action is necessary and testing is complete.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. Verify that the seat belt warning light illuminates normally.
Inspection Procedure J-1
Headlight and Taillight: The taillights does not illuminate.
Taillight Relay Circuit
