Montero V6-3.8L SOHC (2005)
1. Use a press and steel plate to remove the clutch gear and bearing together.
2. Using a press, hold the supports against the bearing inner race, and separate the clutch gear and bearing.
ASSEMBLY SERVICE POINTS
>>A<< OIL SEAL INSTALLATION
Use special tool MB991168 to tap the oil seal until it is flush with the clutch housing.
>>B<< BEARING/CLUTCH GEAR INSTALLATION
1. Use special tool MB990799 to press-fit the bearing to the shoulder of the clutch gear.
CAUTION: Place special tool MB990890 or MB990891 against the outer race of the bearing.
