Montero V6-3.8L SOHC (2005)
2. Use special tool MB990890 or MB990891 to press-fit the bearing to the side of the clutch housing.
>>C<<OIL SEAL INSTALLATION
Use special tools MB990926 and MB990938 To press-fit the oil seal to the clutch housing.
>>D<< SPRING PIN INSTALLATION
Tap the spring pin from the chamfered side of the shaft rod until the projection length becomes the length shown in the illustration.
>>E<< SPACER INSTALLATION
1. Place the current spacer in the area shown in the illustration to check that the dimensions shown in the illustration are within the standard
values.
Standard Value (A): 0.05 - 0.3 mm (0.002 - 0.012 inch)
2. If the dimensions are outside of the standard values, select the correct spacer type to fit in the standard values. Spacer type
>>F<< BEARING INSTALLATION