mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Ignition Switch|Page 3971 > < Ignition Switch|Page 3969
Page 27
background image

STEP 5. Check key reminder switch connector D-16 for loose, corroded or damaged terminals, or terminals pushed back in the connector.

Q: Is key reminder switch connector D-16 in good condition?

YES: Go to Step 6.

NO: Repair or replace it. Refer to Harness Connector Inspection.

STEP 6. Check the harness wire between key reminder switch connector D-16 and body ground.

Q: Is the harness wire between key reminder switch D-16 (terminal No.4) and body ground damaged?

YES: There is no action to be taken.

NO: Repair or replace it. Refer to Harness Connector Inspection.

Ignition Switch|Page 3971 > < Ignition Switch|Page 3969