Montero Sport V6-3.5L SOHC (2004)
STEP 7. Check the harness wire between key reminder switch connector D-16 (terminal No.2 and 6) and ETACS-ECU connector D-11
(terminal No.8 and 12).
NOTE: After checking intermediate connector C-72 and D-13, check the wires. If intermediate connector C-72 and D-13 are damaged, repair or replace
them. Refer to Harness Connector Inspection.
Q: Is the harness wire between key reminder switch D-16 (terminal No.2 and 6) and ETACS-ECU connector D-11 (terminal No.8 and 12) in good
condition?
YES: Go to Step 8.
NO: Repair or replace it. Refer to Harness Connector Inspection.
STEP 8. Check for continuity between terminals (except No. 4 and No. 6) of key reminder switch connector D-16.
1. Measure at key reminder switch connector D-16 without disconnecting the connector.
2. Check that there is no continuity between key reminder switch terminal No. 4 and each terminal (except terminal No. 6), as well as between key
reminder switch terminal No.6 and each terminal (except terminal No. 4).