Montero Sport XLS 4WD V6-3.5L SOHC (2002)
REMOVAL AND INSTALLATION
REMOVAL SERVICE POINT
<<A>> LOWER ARM BALL JOINT DISCONNECTION
WARNING: Support special tool MB991113 or MB990635 with a cord, etc. to prevent it from coming off.
Use special tools MB991113 or MB990635 to disconnect the lower arm ball joint form the knuckle.
NOTE: Only loosen the mounting nut, do not remove it from the ball joint.
Loosen the anchor arm bolt of the torsion bar all the way.
INSTALLATION SERVICE POINTS
>>A<< TORSION BAR/REAR ANCHOR ARM INSTALLATION
1. Check the identification marks at the end of the left and right torsion bars.
R --> for right side
L --> for left side
2. When installing the torsion bar, align the white mark on the serrated section of the torsion bar with the mating mark on the anchor arm.
