Montero XLS 4WD V6-3.5L SOHC (2001)
Body Emblem: Service and Repair
Removal And Installation
Required Special Tool:
MB990528: Stripe Tape Spatula
INSTALLATION SERVICE POINT
>>A<< MARK INSTALLATION
1. Installation position
Attach to the position shown in the illustration.
2. Installation procedure
1. Use 3MT(TM) AAD Part number 8906 or equivalent to clean the mark installation surfaces on the body.
CAUTION: When attaching the marks, the ambient temperature should be 20 ° - 38 °C (60 ° - 100 °F) and the air should be completely free
