mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Side Step - Revised Mounting|Page 5651 > < Towing Information|Service and Repair|Page 5645
Page 1
background image

Auxiliary Step / Running Board: Technical Service Bulletins
Side Step - Revised Mounting

No.: TSB-01-51-001

DATE: March, 2001 

MODEL: 2001 Montero

SUBJECT:
CHANGED SIDE STEP MOUNTING - SERVICE MANUAL REVISION

[TSB Revision TSB-01-51-001]

PURPOSE 

This bulletin contains corrections and revisions relating to the side step assembly mounting bolts, nuts, and tightening torque for vehicle produced
beginning August 2, 2000.

^

The tightening torque for the front and rear side step M8 assembly mounting bolts is increased.

^

The upper center side step mount is changed from a bolt & weld nut mounting to a nut & weld bolt mounting.

^

The upper rear side stop mount is changed from a nut & weld bolt mounting to a bolt and weld nut mounting.

Write the TSB revision number of this bulletin in the "TSB Revision" box at the bottom of the affected service manual page.

AFFECTED VEHICLES
2001 Montero produced from August 2, 2000

AFFECTED SERVICE MANUALS

2001 Montero Service Manual, Volume 3, Pages 51-21 & 51-37

SERVICE MANUAL REVISIONS

Side Step - Revised Mounting|Page 5651 > < Towing Information|Service and Repair|Page 5645