Montero XLS 4WD V6-3.5L SOHC (2001)
3. While keeping the distance between the tip of demagnetizer and the roof panel to approx. 5 cm (2.0 inches), move the demagnetizer slowly with a
sweeping manner on the rear-halt surface of roof panel.
CAUTION: If the tip of demagnetizer touches the roof panel, the magnetizing condition of body becomes worse to the contrary. Absolutely avoid
this.
4. Slowly draw the demagnetizer apart from the body. Turn OFF the switch of demagnetizer when it is apart from the body more than 5 cm.
CAUTION: If the demagnetizer is turned OFF near the body or it is suddenly separated from the body, the magnetizing condition of body
becomes worse to the contrary. Absolutely avoid these.
5. Perform the demagnetization until the X- and Y-output of "Sensor level" become the range of 301 to 722 on the magnetization/demagnetization
confirmation screen of the RV meter. Press the function switch 1 [CAL.COMP.] to call out the correction screen.
6. The screen that demands driving around of the vehicle is displayed.
