mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Audible Warning Device > < Vacuum Pump, Cruise Control|Locations|Page 6258
Page 1
background image

ABS Light: Testing and Inspection

BRAKE WARNING LIGHT CHECK 

Check that the brake warning light illuminates as follows:
1. Check that the brake fluid level in the reservoir is between MIN and MAX lines.
2. Choke the wheels and release the parking brake.

3. When the ignition key is turned to "ON", the brake warning light illuminates.
4. When the ignition key is turned from "START" back to "ON", the brake warning light illuminates for approximately 3 seconds and then switches

off.

5. If the illumination is other than the above, check the diagnostic trouble codes.

Audible Warning Device > < Vacuum Pump, Cruise Control|Locations|Page 6258