mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2189 > < Initial Inspection and Diagnostic Overview|Page 2187
Page 159
background image

YES: Go to Step 18.
NO: Go to step 16.

STEP 16. Check the horn relay connector A-10X for damage.

Q: Is horn relay connector A-10X in good condition?

YES: Go to Step 17.
NO: Repair or replace it. Refer to Harness Connector Inspection. The horn should sound when the theft-alarm system is triggered.

STEP 17. Check the harness wire between horn relay connector A-10X and battery.

Q: Is the harness wire between theft-alarm horn relay connector A-10X and battery in good condition?

YES: There is no action to be taken.
NO: Repair it. The horn should sound when the theft-alarm system is triggered.

STEP 18. Check the horn relay connector A-10X and ETACS-ECU connector D-223 for damage.

Initial Inspection and Diagnostic Overview|Page 2189 > < Initial Inspection and Diagnostic Overview|Page 2187