mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2190 > < Initial Inspection and Diagnostic Overview|Page 2188
Page 160
background image

Q: Are horn relay connector A-10X and ETACS-ECU connector D-223 in good condition?

YES: Go to Step 19.
NO: Repair or replace them. Refer to Harness Connector Inspection. The horn should sound when the theft-alarm system is triggered.

STEP 19. Check the harness wires between horn relay connector A-10X and ETACS-ECU connector D-223.

NOTE:  After checking intermediate connector D-28, check the wires. If intermediate connector D-28 is damaged, repair or replace it. Refer to Harness
Connector Inspection.

Q: Are the harness wires between horn relay connector A-10X and ETACS-ECU connector D-223 in good condition?

YES: Go to step 20.
NO: Repair them. The horn should sound when the theft-alarm system is triggered.

Initial Inspection and Diagnostic Overview|Page 2190 > < Initial Inspection and Diagnostic Overview|Page 2188