Montero XLS 4WD V6-3.5L SOHC (2001)
STEP 11. Check the harness wires between rear door switch (RH) connector F-05 and ETACS-ECU connector D-222.
NOTE: After checking intermediate connector D-111 and junction block connector D-209, check the wires. If intermediate connector D-111 and
junction block connector D-209 are damaged, repair or replace them. Refer to Harness Connector Inspection.
Q: Are the harness wires between rear door switch (RH) connector F-05 and ETACS-ECU connector D-222 in good condition?
YES: Replace the ETACS-ECU. The rear door switch (RH) input signal should be able to be checked and the functions, which are described in the
"Technical Description (comment), should work normally.
NO: Repair them. The rear door switch (RH) input signal should be able to be checked and the functions, which are described in the "Technical
Description (comment)," should work normally.
