Montero XLS 4WD V6-3.5L SOHC (2001)
Q: Is driver's door lock key cylinder switch connector H-03 in good condition?
YES: Go to Step 5.
NO: Repair or replace it. Refer to Harness Connector Inspection. The input signal from the driver's door lock key cylinder switch should be able to be
checked and the functions, which are described in the "Technical Description (comment)," should work normally.
STEP 5. Check the harness wires between driver's door lock key cylinder switch connector H-03 and ground.
NOTE: After checking intermediate connector D-25, check the wires. If intermediate connector D-25 is damaged, repair or replace it Refer to Harness
Connector Inspection.
Q: Are the harness wires between driver's door lock key cylinder switch connector H-03 and ground in good condition?
YES: There is no action to be taken.
NO: Repair them. The input signal from the driver's door look key cylinder switch should be able to be checked and the functions, which are
described in the "Technical Description (comment)," should work normally.
STEP 6. Check the driver's door lock key cylinder switch connector H-03 and ETACS-ECU connector D-223 for damage.
Q: Are driver's door lock key cylinder switch connector H-03 and ETACS-ECU connector D-223 in good condition?
