Montero XLS 4WD V6-3.5L SOHC (2001)
Back door: Go to Step 14.
STEP 2. Check the driver's door lock key cylinder switch.
Q: Is the driver's door lock key cylinder switch in good condition?
YES: Go to Step 3.
NO: Replace it. The input signal from the driver's door lock key cylinder switch should be able to be checked and the functions, which are described
in the "Technical Description (comment)," should work normally.
STEP 3. Check the driver's door lock key cylinder switch ground circuit at driver's door lock key cylinder switch connector H-03.
1. Disconnect driver's door lock key cylinder switch connector H-03 and measure at the harness side.
2. Measure the resistance between terminal 2 and ground.
Q: Is the resistance less than 2 ohm?
YES: Go to Step 6.
NO: Go to Step 4.
STEP 4. Check driver's door lock key cylinder switch connector H-03 for damage.