Montero XLS 4WD V6-3.5L SOHC (2001)
3. Check that the 4WD indicator lamp illuminates, flashes or switches of according to the pattern shown in the illustration when the transfer shift
lever is move to each transfer position.
4. If the selection is not completed even after 5 seconds or more have passed, carry out the following procedure.
1. Return the transfer shift lever to the position it was at before selection.
2. Start the engine, drive the vehicle straight forward, and then stop the engine.
3. Apply the parking brake, and then move the selector lever to the N position.
4. Operate the transfer shift lever once more.
NOTE: If the vehicle is not fully stopped or if the selector lever is at a position other than N when selecting 4HLc or 4LLc, the 4WD
indicator lamp will flash more quickly than normal, and the 4WD range will not be selected. This is a normal phenomenon which serves to
control the smooth selection of 4HLc and 4LLc. <Sport mode 5A/T>
