Montero XLS 4WD V6-3.5L SOHC (2001)
Shift Cable: Adjustments
TRANSMISSION CONTROL CABLE ADJUSTMENT
1. Move the selector lever to the "N" position.
2. Loosen the upper control lever adjusting nut.
3. Check that the inhibitor switch is at N range.
4. Adjust the upper control lever so that there is no slackness or excessive tightness in the transmission control cable, and then tighten the adjusting
nut to the specified torque.
Tightening torque: 23 ± 4 Nm (17 ± 3 ft. lbs.)
5. Check that the transmission operation and functioning in each range corresponds accurately to the position of the selector lever.