Outlander 2WD V6-3.0L (6B31) (2007)
/Page-393010.png)
1. Apply engine oil to the camshaft oil seal lip.
2. Use special tools MD998713 and MD998777 to press-fit the camshaft oil seal.
]]G[[ CAMSHAFT SPROCKET INSTALLATION
1. Use special tools MB990767 and MD998719 in the same way as during removal to install the camshaft sprocket.
2. Tighten the camshaft sprocket mounting bolt to the specified torque.
Tightening torque: 90 ± 10 Nm (67 ± 7 ft-lb)
]]H[[ ENGINE OIL PRESSURE SWITCH INSTALLATION
Apply the specified sealant to the thread of the engine oil pressure switch.
Specified Sealant: 3M(TM) ADD Part number 8672 or equivalent
]]I[[ O-RING/ENGINE OIL CONTROL VALVE INSTALLATION
