Outlander 2WD V6-3.0L (6B31) (2007)
/Page-1703013.png)
STEP 4. Luggage compartment light bulb check
Check that the luggage compartment light bulb is normal.
Q: Does luggage compartment light work normal?
YES: Go to Step 5.
NO: Replace the luggage compartment light bulb.
STEP 5. Check ETACS-ECU connector C-311 for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is ETACS-ECU connectors C-311 in good condition?
YES: Go to Step 6.
NO: Repair the damaged parts.
STEP 6. Check the wiring harness between luggage compartment light connector F-02 (terminal No. 2/1) and ETACS-ECU connector C-311
(terminal No. 3/17).
NOTE: Prior to the wiring harness inspection, check intermediate connector D-12, and repair if necessary.
Q: Is wiring harness between luggage compartment light connector F-02 (terminal No. 2/1) and ETACS-ECU connector C-311 (terminal No. 3/17) in
good condition?
YES: Go to Step 7.
NO: Repair the wiring harness.
STEP 7. Retest the system
Check that the luggage compartment light illuminates/extinguishes normally.
Q: Do the luggage compartment work normal?
YES: The trouble can be an intermittent malfunction(Refer to How to use Troubleshooting/inspection Service Points - How to Cope with
Intermittent Malfunction).
NO: Replace the ETACS-ECU.
Inspection Procedure 4
Inspection Procedure 4: The foot light does not illuminate normally.
