Outlander 2WD V6-3.0L (6B31) (2007)
/Page-1703012.png)
STEP 2. Using scan tool MB991958, check data list.
Use the ETACS-ECU service data to check the signals related to the operation of luggage compartment light.
-
Turn the ignition switch to the "LOCK" (OFF) position.
-
Remove the ignition key from the ignition key cylinder.
-
Open each door.
-
Open the liftgate.
Q: Does scan tool MB991958 display the items "Dr door unlock", "IG voltage", "Dr door ajar switch", "As door ajar switch", "RR door ajar switch",
"RL door ajar switch", "Trunk/gate trunk ajar switch" and "Handle lock switch" as normal condition?
YES<Normal conditions are displayed for all items.>: Go to step 3.
NO<Normal condition is not displayed for item No. 228.>: Troubleshoot the ETACS-ECU. Refer to Body Control Systems, Diagnosis -
Inspection Procedure 4 "ETACS-ECU does not receive any signal from the front door lock actuator".
NO<Normal condition is not displayed for item No.254.>: Troubleshoot the ETACS-ECU. Refer to Body Control Systems, Diagnosis -
Inspection Procedure 4 "ETACS-ECU does not receive any signal from the ignition switch (IG1)".
NO<Normal condition is not displayed for item No. 256.>: Troubleshoot the ETACS-ECU. Refer to Body Control Systems, Diagnosis -
Inspection Procedure 5 "ETACS-ECU does not receive any signal from the front door switch (LH)".
NO<Normal condition is not displayed for item No. 257.>: Troubleshoot the ETACS-ECU. Refer to Body Control Systems, Diagnosis -
Inspection Procedure 6 "ETACS-ECU does not receive any signal from the front door switch (RH)".
NO<Normal condition is not displayed for item No. 258.>: Troubleshoot the ETACS-ECU. Refer to Body Control Systems, Diagnosis -
Inspection Procedure 7 "ETACS-ECU does not receive any signal from the rear door switch (LH)".
NO<Normal condition is not displayed for item No.259.>: Troubleshoot the ETACS-ECU. Refer to Body Control Systems, Diagnosis -
Inspection Procedure 8 "ETACS-ECU does not receive any signal from the rear door switch (RH)".
NO<Normal condition is not displayed for item No. 260.>: Troubleshoot the ETACS-ECU. Refer to Body Control Systems, Diagnosis -
Inspection Procedure 9 "ETACS-ECU does not receive any signal from the liftgate switch".
NO<Normal condition is not displayed for item No. 264.>: Troubleshoot the ETACS-ECU. Refer to Body Control Systems, Diagnosis -
Inspection Procedure 3 "ETACS-ECU does not receive any signal from the key reminder switch".
STEP 3. Check luggage compartment light connector F-02 for loose, corroded or damaged terminals, or terminals pushed back in the
connector.
Q: Is luggage compartment light connector F-02 in good condition?
YES: Go to Step 4.
NO: Repair the damaged parts.
