Outlander 4WD L4-2.4L (4B12) (2008)
Removal Steps 1-3 (Part 2)
REMOVAL SERVICE POINT
[[A]] NEGATIVE (-) BATTERY CABLE DISCONNECTION
DANGER: Wait at least 60 seconds after disconnecting the battery cable before doing any further work.
WARNING: Battery posts, terminals and related accessories contain lead and lead compounds. WASH HANDS AFTER HANDLING.
Removal Steps 1-3 (Part 2)
Disconnect the negative (-) battery cable from the battery and tape the terminal to prevent accidental connection and air bag deployment.
[[B]] IMPACT SENSOR CONNECTOR REMOVAL
Slide the outer housing of the impact sensor connector in the arrow direction shown, and disconnect the connector.
NOTE: The illustration shows the side impact sensor (rear). As for the impact sensor (front), follow the same procedure.
INSTALLATION SERVICE POINTS
]]A[[ PRE-INSTALLATION INSPECTION