Outlander 4WD L4-2.4L (4B12) (2008)
Ignition Switch: Service and Repair
REMOVAL AND INSTALLATION
CAUTION:
-
Before removing the steering wheel assembly, refer to SRS Service Precautions and Air Bag Module and Clock Spring <Vehicles with
WCM>.
-
After the installation, perform a calibration for the ASC-ECU to learn the steering wheel sensor neutral point (Refer to traction control,
On-vehicle Service Steering Wheel Sensor Calibration). <Vehicles with WCM and ASC>
Pre-removal & Post-installation Operation
Removal Steps 1-10 (Part 1)