Outlander 4WD L4-2.4L (4B12) (2008)
Removal Steps 1-10 (Part 2)
REMOVAL SERVICE POINT
<<A>> STEERING LOCK CYLINDER REMOVAL <VEHICLES WITH WCM>
1. Insert the key into the steering lock cylinder, and turn the ignition key to the ACC position.
2. With using a cross-headed screw driver (small) or similar items to press in the lock pin, remove the ignition key, and then remove the steering lock
cylinder.
INSTALLATION SERVICE POINT
>>A<< WIRELESS CONTROL MODULE (WCM) <VEHICLES WITH WCM>/RECEIVER ANTENNA MODULE <VEHICLES WITH
KOS> INSTALLATION
Check that the top claw of receiver antenna module is fixed securely to the boss of steering lock and the antenna is not floated on the key cylinder.