Outlander 4WD L4-2.4L (4B12) (2008)
/Page-1234005.png)
Disassembly Steps 1-11
Required Special Tools:
^
MB991237: Spring Compressor Body
^
MB991239: Arm Set
DISASSEMBLY SERVICE POINT
[[A]] SELF-LOCKING NUT REMOVAL
CAUTION:
^
To hold the coil spring securely, install the special tool MB991239 evenly, and so that the space between both arms of the special tool will
be maximum within the installation range.
^
Do not use an impact wrench to tighten the bolt of the special tool MB991237. It will break the special tool.
