Outlander 4WD L4-2.4L (4B12) (2008)
Suspension Strut / Shock Absorber: Removal and Replacement
Front Suspension
STRUT ASSEMBLY
REMOVAL AND INSTALLATION
CAUTION:
^
As for vehicles with headlamp auto levelling system, disconnect the height sensor from the lower arm before operation to prevent
damages to the height sensor.
^
The part indicated by *is the nut with friction coefficient stabilizer. In removal, ensure there is no damage, clean dust and soiling from
the bearing and thread surfaces, and tighten it to the specified torque.
Pre-removal & Post-installation Operation
Removal Steps 1-6
Rear Suspension
SHOCK ABSORBER ASSEMBLY