Outlander 4WD L4-2.4L (4B12) (2008)
/Page-1234007.png)
2. Align the end of the coil spring with the shock absorber as shown in the figure.
]]B[[ SELF-LOCKING NUT INSTALLATION
CAUTION: The locking nut for the piston rod inside the shock absorber may be loose. Do not use an impact wrench to tighten the
self-locking nut.
Counter the piston rod of the shock absorber as shown in the figure, and tighten the self-locking nut to the specified torque.
Tightening torque: 25 ± 5 Nm (19 ± 3 ft-lb)
