Raider V6-3.7L SOHC (2006)
NOTE: Failure to follow test instructions or aborting the test will cause faults to set when performing the Occupant Classification Module
System Verification Test. To prevent faults due to process errors: Verify That All Tests Steps That Led You Here Were Performed As
Directed; Verify That The Ignition Is In Run; Wait 30 Seconds After Changing The Seat Weight Before Proceeding To Allow The System To
Stabilize; Only Press Scan Tool Buttons When Directed To Do So; & Perform The Occupant Classification Module System Verification Test
To Completion. See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Diagnostic Trouble Code Tests and
Associated Procedures/Verification Tests and Procedures/Airbag Systems/Occupant Classification System Verification Test
Reinstall the seat in the vehicle. Turn the ignition on. With the scan tool in OCM, select More Options, select System Tests, and select Occupant
Classification Module System Verification Test. Run the test by following the instructions displayed by the scan tool. When the test is complete,
Go To 1
