200SX L4-1998cc 2.0L DOHC MFI (SR20DE) (1995)
2.
Grind the repair surface with a 36 grit disc. Grind about 1_" around the actual damage to achieve a taper for best adhesion.
3.
Featheredge the paint around the repair using an orbital sander with a 180 grit disc. Wipe with a clean dry rag and blow off with air.
4.
Mix Flexible Parts Repair Material according to the manufacturer instructions and apply to the repair area with a squeegee, building it up higher
than the undamaged area. Allow it to cure for 20-30 minutes at 60-80 ° F.
5.After curing, sand with 180 grit disc followed by a 240 grit disc.
6.
Fill sand scratches and pinholes with Flexible Parts putty. Allow at least 15 minutes to dry. Sand with a 320 grit disc.