Altima L4-2.5L (QR25DE) Hybrid (2007)
29. Reassemble the seat in reverse order of removal.
NOTES:
^ Ensure the seat harness clips and routing are in the same place as before disassembly.
^ Thread a tie wrap from the kit through the holes in the seat pan. Tie wrap all the wires together just below the blue connector as shown in Figure A29.
^ Seat back to seat frame bolt TORQUE: 60 Nm (6.1 Kg-m, 44.2 ft-lb)
^ Install a new belt buckle to seat frame with the new nut that comes with the buckle.
TORQUE: 49 Nm (5 Kg-m, 36 ft-lb)
^ During cushion installation add U-clips to the cushion J-clips as shown in Figures A30a & A30b.
30. Reinstall the seat into the vehicle, reconnecting the seat harnesses to the body harnesses while doing so.
31. Install the four seat-to-body bolts and torque in the sequence shown below.