Altima L4-2.5L (QR25DE) Hybrid (2007)
27. Install the two new bushings (two lower, two upper) into the new Clamps from the Parts Information section of this bulletin.
NOTE:
The lower bushing is shown here. The upper bushing has three mounting tabs.
IMPORTANT:
^
The lower new bushings have a notch molded into the side. (see circle)
^
The lower new bushings have a long and a short side. (see arrows)
^ The lower bushings MUST be installed as show in the picture below.
^
The new upper bushings have clips that hold them into the seat pan.
^
The upper bushings MUST be installed with clip tabs as show below.