Altima L4-2.5L (QR25DE) Hybrid (2007)
^ During cushion installation add U-clips to the cushion J-clips as shown in Figures B18a & B18b.
18. Reinstall the seat into the vehicle, reconnecting the seat harnesses to the body harnesses while doing so.
19. Install the four seat-to-body bolts and torque in the sequence shown below.
TORQUE: 49 Nm (5 Kg-m, 36 ft-lb).
20. Reinstall the headrest.
21. Reconnect the battery cables.
22. Check seat for proper operation.
23. Because the battery was disconnected; some systems will need to be reset.
^ Reference Section PG, ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL of the 2008 Altima Electronic Service
Manual for these procedures.