Altima L4-2.5L (QR25DE) Hybrid (2007)
19. Install the seat in the vehicle.
^ Install and torque the seat-to-body bolts in the following order:
Front inner
Front outer
Rear inner
Rear outer
^ Seat bolts torque: 49 Nm (5.0 kg-m, 36 ft lb)
^ For seat installation procedure, refer to BODY INTERIOR, SEAT of the appropriate ESM, if needed.
^ Do not use the release handle to lift the seat.
^ If the tracks are not aligned, lift up on the release handle, and then adjust as needed.
20. Verify the seat operates normally; make sure both tracks lock into place after fore / aft adjustment.
21. Reconnect both battery cables, negative cable last.
22. Reset / initialize all applied systems i.e., radio, clock, sunroof, etc.