Altima L4-2.5L (QR25DE) Hybrid (2007)
Power Steering Relay: Service and Repair
EPS DC/DC CONVERTER
Exploded View STC-60
Removal and Installation
Removal
1. Pull the service plug to disconnect high voltage battery.
2. Remove rear seat.
3. Remove EPS DC/DC converter cover nuts and remove the cover.
4. Remove nut of shield earth.
5. Disconnect EPS motor power line (245 V) connector and clip.
6. Disconnect EPS motor power line ground.
7. Disconnect EPS motor power line (42 V) connector and clip.
8. Remove EPS DC/DC converter nuts and remove the converter assembly.
Installation
Installation is in the reverse order of removal.