Altima V6-3.5L (VQ35) (2003)
6.
Completely wash the ground terminal with Electrical Contact Cleaner and blow it dry.
IMPORTANT:
If the ATF is not completely cleaned off of the terminal, the solder will not stick correctly.
NOTE:
^
Use a local source for electrical contact cleaner.
^
Nissan Trans Cooler Flush (999MP-AM006P) may also be used to clean the terminal (see Parts Information).
IMPORTANT:
You must solder the terminal. Do Not attempt to tighten the terminal crimp by squeezing it with a crimp tool or pliers.