nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Ambient Temperature Sensor / Switch HVAC > < Component|Page 4893
Page 2
background image

NOTE:
To remove the rear roof console grilles, turn the grille counter-clockwise to release the grille from the rear roof console.

Installation
Installation is in the reverse order of removal.

Rear Floor Duct

REAR FLOOR DUCT

Removal
1. Remove the luggage side finisher lower RH. Refer to See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair.
2. Reposition the floor carpet out of the way.
3. Remove the two bolts and remove the rear floor duct.

Installation
Installation is in the reverse order of removal.

Rear Overhead Ducts

REAR OVERHEAD DUCTS

Removal
1. Remove the luggage side finisher lower RH. Refer to See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair.
2. Remove the headliner. Refer to See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair.

NOTE:
The rear headliner duct connected to the rear overhead duct is part of the headlining trim panel and is replaced as an assembly.
3. Remove the two bolts and remove the rear upper and lower overhead ducts.

Installation
Installation is in the reverse order of removal.

RH and LH Side Demister Duct

RH AND LH SIDE DEMISTER DUCT

Removal
1. Remove the instrument panel trim. Refer to See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and

Repair/Instrument Panel Assembly/Removal And Installation.

2. Remove the RH or LH side demister duct screws.
3. Remove the RH or LH side demister duct.

Installation
Installation is in the reverse order of removal.

RH and LH Ventilator Duct

RH AND LH VENTILATOR DUCT

Removal
1. Remove the instrument panel trim. Refer to See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and

Repair/Instrument Panel Assembly/Removal And Installation.

2. Remove the front heater and cooling unit assembly. Refer to See: Housing Assembly HVAC/Service and Repair/Removal And Installation.
3. Remove the RH or LH ventilator duct.

Installation
Installation is in the reverse order of removal.

Ambient Temperature Sensor / Switch HVAC > < Component|Page 4893