nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

ABOUT US
A/T - Buzz/Grinding Noise When Fluid Is Cold|Page 3065 > < A/T - Buzz/Grinding Noise When Fluid Is Cold|Page 3059

Axxess 4WD L4-2389cc 2.4L SOHC MFI (KA24E) (1990)

Page 1
background image

Fluid Pump: Customer Interest
A/T - Buzz/Grinding Noise When Fluid Is Cold

Classification:

Section: Automatic

AT89-011

Transmission

Reference:
TECHNICAL BULLETIN TS89-171
Models:
1990 Axxess (M11)
Date:
December 21, 1989

AUTOMATIC TRANSMISSION BUZZ NOISE WHEN COLD

APPLIED MODELS:

1990 Axxess (M11) with automatic transmission

APPLIED DATE:

Manufactured prior to June 1, 1989

APPLIED VINS:

2WD: JN1HM15P3LX-009616 4WD: JN1HM15J1LX-001185

SERVICE INFORMATION

Some 1990 Axxess vehicles equipped with automatic transaxles and manufactured prior to the Applied VINs listed above may exhibit a buzzing/grinding
noise during acceleration while the oil is cold.  This noise may be caused by oil cavitation in the discharge side of the automatic transaxle oil pump. 

A/T - Buzz/Grinding Noise When Fluid Is Cold|Page 3065 > < A/T - Buzz/Grinding Noise When Fluid Is Cold|Page 3059