Cube L4-1.8L (MR18DE) (2010)
Install in the reverse order of removal.
CAUTION:
-
Never to bend cable too much, keeping the radius 100 mm (3.937 in) or more.
-
Check that cable is not offset from the positioning grommet, and apply the sealant to the grommet (at * mark) properly.
-
Check that hood lock control cable is properly engaged with hood lock.
-
After installation, perform hood fitting adjustment. See: Adjustments/Without Intelligent Key System.
-
After installation, perform hood lock control inspection. See: Inspection/Without Intelligent Key System.