Cube L4-1.8L (MR18DE) (2010)
- GO TO 3.
3.WRITING VEHICLE SPECIFICATION
CONSULT-III Configuration
Perform "WRITE CONFIGURATION - Config file" or "WRITE CONFIGURATION - Manual selection" to write vehicle specification. See: Body
and Frame/Body Control Systems/Testing and Inspection/Programming and Relearning/Configuration (BCM)/Special Repair Requirement/With
Intelligent Key System.
- GO TO 4.
4.INITIALIZE BCM (NATS)
Perform BCM initialization. (NATS)
- WORK END
Without Intelligent Key System
INSPECTION AND ADJUSTMENT
ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT (BCM) : Special Repair Requirement
1.SAVING VEHICLE SPECIFICATION
CONSULT-III Configuration
Perform "READ CONFIGURATION" to save or print current vehicle specification. See: Body and Frame/Body Control Systems/Testing and
Inspection/Programming and Relearning/Configuration (BCM)/Description/Without Intelligent Key System
NOTE:
If "READ CONFIGURATION" can not be used, use the "WRITE CONFIGURATION - Manual selection" after replacing BCM.
- GO TO 2.
2.REPLACE BCM
Replace BCM. See: Service and Repair/With Intelligent Key System/Exploded View.
- GO TO 3.
3.WRITING VEHICLE SPECIFICATION
CONSULT-III Configuration
Perform "WRITE CONFIGURATION - Config file" or "WRITE CONFIGURATION - Manual selection" to write vehicle specification. See: Body
and Frame/Body Control Systems/Testing and Inspection/Programming and Relearning/Configuration (BCM)/Special Repair Requirement/Without
Intelligent Key System.
- GO TO 4.
4.INITIALIZE BCM (NATS)
Perform BCM initialization. (NATS)
- WORK END