D21 Hardbody 2WD L4-2389cc 2.4L SOHC MFI (KA24E) (1990)
1. Remove adjuster hole plug, and turn down adjuster wheel with a screwdriver until shoe touches brake drum. Make sure that parking control lever
is released completely.
2. Return adjuster wheel 7 to 8 latches.
3. Install adjuster hole plug, and make sure that there is no drag between shoes and brake drum when rotating disc rotor.
BREAKING IN DRUM LINING
1. Set transfer lever in the "2H" position. Using either low or 2nd transmission speed, drive the unloaded vehicle at approximately 30 km/h (19
MPH) on a safe, level and dry road.
2. Depress the release button of parking brake lever, then pull the lever with a force of 98 N (10 kg, 22 lb).
3. While holding the lever back, continue to drive the vehicle 100m (328 ft).
4. Repeat steps 1 through 3 two or three times.