D21 Hardbody 4WD V6-2960cc 3.0L SOHC (VG30i) (1986)
3.
From underneath the main relay connector, cut the black/white wire and then splice and solder it to the white wire as shown in Figure 2
below. Cover soldered portion and cut portion of black/white wire with tape.
4.
Re-attach relay bracket to right hand hoodledge.
B.
Warning Label Application
1.
Apply warning label to upper side of countermeasure E.C.C.S. control unit as shown in Figure 3.
C.
E.C.C.S. Control Unit Installation