nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Clockspring Assembly / Spiral Cable, Air Bag > < Passenger Air Bag Deactivation Switch|Page 9262
Page 1
background image

Air Bag Deactivation Switch: Service and Repair
Passenger Air Bag Deactivation Switch Indicator

REMOVAL

-

Before servicing SRS, turn the ignition switch OFF, disconnect both battery cables and wait for at least 3 minutes.

1. Remove meter cover.
2. Release passenger air bag deactivation switch indicator tabs from back side of meter cover.
3. Remove passenger air bag deactivation switch indicator from front side of meter cover.

INSTALLATION

NOTE:

-

To install, reverse removal procedure.

-

After replacement, perform Self-diagnosis for SRS. Refer to "Passenger Air Bag Deactivation Switch Indicator Operation Check", "TROUBLE
DIAGNOSES - Restraint System".

Clockspring Assembly / Spiral Cable, Air Bag > < Passenger Air Bag Deactivation Switch|Page 9262