nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Brakes - ABS Lamp ON/FR LH SENSOR (OPEN) Code Set|Page 8178 > < Brakes - ABS Lamp ON/FR LH SENSOR (OPEN) Code Set|Page 8172
Page 1
background image

ABS Sensor Unit: All Technical Service Bulletins
Brakes - ABS Lamp ON/FR LH SENSOR (OPEN) Code Set

Classification:
BR02-004

Reference:
NTB02-065

Date:
June 19, 2002

2001-2002 FRONTIER; ABS LIGHT "ON" CODE "FR LH SENSOR [OPEN]"

APPLIED VEHICLE(S): 
2001 - 2002 Frontier (D22) V6 2WD

SERVICE INFORMATION

If an applied vehicle has;

^

the ABS warning light ON (continuously or intermittently), and

^

"FR LH SENSOR [OPEN]" is displayed in CONSULT - ABS - SELF-DIAGNOSIS,

Determine if the female pin terminals in the left front ABS wheel speed sensor connector have a loose fit (are making poor contact).

Use the service information in this bulletin to diagnosis and repair the vehicle if this incident should occur.

SERVICE PROCEDURE

1.

Disconnect the left front ABS wheel speed sensor at the brown (E16) connector (see figure 1).

2.

Check resistance through the left front ABS wheel speed sensor (spec 1.28-1.92 K ohms).

NOTE: 

Be sure to use the correct size test pins when checking the resistance. Inserting probes or test pins that are too large may damage the connector.

3.

If the resistance reading in step 2 is:

^

Within specification: Go to step 4.

Brakes - ABS Lamp ON/FR LH SENSOR (OPEN) Code Set|Page 8178 > < Brakes - ABS Lamp ON/FR LH SENSOR (OPEN) Code Set|Page 8172